lloyd schrieb:I do wonder whether there is any point in trying to modify paging file/virtual memory?

lloyd schrieb:Yes exactly (haha at the 404 page).

Klaus1979 schrieb:Many roads lead to Rome, we like to say in German. In your case, the easiest way is to use Interrop Unlock. The last version, as far as I know, is this.

InteropTools_2.0.96.0_x86_x64_arm_th1_LegacyRelease.appxbundle

But you can also use this for the Interop Unlock.

InteropToolsApp_1.9.400.0_arm.appxbundle

This variant is better known as "RC2". However, I would not go back any further. Already in RC2 not all functions are available which have later variants, but it would be enough for the Interop Unlock.

First you switch to developer mode on the 830. In the German menu navigation, the path reads, All Settings / Update and Security / For developers. Install the Interop Tools of your choice, start the Interop Tools with "This Device" or "This Device (through provider extensions)" and switch in the Interop Tools to Unlock / Interop Unlock. Now switch on "Restore NDTKSvc" and restart the 830. After the restart you visit Interop Unlock again and switch on "New Capability Engine Unlock". Restart the 830 and visit Interop Unlock again after restart. If the switches for "Restore NDTKSvc" and "New Capability Engine Unlock" are still on, the interop unlock was successful.

InteropTools_2.0.96.0_x86_x64_arm_th1_LegacyRelease.appxbundle. No provider extensions were found (I was not sure which to install) so I used "This Device" only. I followed your instructions, enabling then restarting only Restore NDTKSvc and New Capability Engine Unlock. I did not switch on Interop/Cap Unlock. After my second restart, both switches remain on: success!

The Ad blocker seems to work well. If you don't want to start a Telegram account, I can upload it for you?

I have noticed some visual "tearing" when scrolling up and down on the phone (e.g. on web page or start menu). Is there any performance penalty to Interop Unlock? I guess if I revert my changes, the hosts file will be intact.

Now I wonder, do I want to take my 950 to Rome?

Klaus1979 schrieb:No, this does not lead to any significant improvement, on the contrary, you can also make the page file smaller, between 64 and 128 GB.

lloyd schrieb:Interesting. Is making it smaller just reducing wear on the flash storage? Or does this also stop the system transferring from memory to storage? I would have thought it would try to maximise use of memory anyway.

lloyd schrieb:Is there any performance penalty to Interop Unlock? I guess if I revert my changes, the hosts file will be intact.

lloyd schrieb:
Now I wonder, do I want to take my 950 to Rome?

Klaus1979 schrieb:Yes, it is definitely interesting. The page file on my devices with more than 8GB eMMC was 2GB for a long time. Then we found that there are no positive effects. But look at that in the portal yourself.

Klaus1979 schrieb:As far as I know, the Interop Unlock does not lead to a higher system load. There is no additional app running, you actually only grant higher rights with the Interop Unlock. I honestly don't know whether you can undo the interop unlock.

Klaus1979 schrieb:The jumps in the image structure are related to the new rendering engine, the older devices work very differently with it. I have a 1020 (S4) that renders absolutely perfectly with 1709 as if the 1709 was made for it. On another 1020, the image composition is absolutely cruel. Did you flash the 830 or did you continue where you were?

Klaus1979 schrieb:The easiest way to bring the 950 to Rome is unfortunately a bit rockier than for the 830. You need WPI and you have to unlock the boot loader first. For some builds you can do root access with WPI which corresponds to the Interop Unlock.

Do you want to know more?

lloyd schrieb:Curious, I might try to reduce it to 128 MB. What do you run your 950 at?

lloyd schrieb:OK it should be fine. I might try to hide Interop Unlock in Settings, I read somewhere I can modify a manifest file and the app will only appear in the Extras list.

lloyd schrieb:I'm tempted... so your method is WPI and not vcREG?

lloyd schrieb:I would want to make a complete backup of my 950 first. I think the OneDrive backup service is not running now, but I did see someone describing how to make an image of your phone which you can restore using some command line on your computer have you done the same thing?

Klaus1979 schrieb:There is WoA on both and there the rabbit runs a little bit differently.

Zitat:Why do you want to do this, what advantage should it bring? Are you afraid that your mother will play with it? You can also delete the IT. Most changes are made in the registry, what has been changed remains until it is changed again, whether IT is on the WP or whether it is not on it.

Zitat:Yes, the VCReg method is only supported up to 1607, with the update to 1703 or higher the adjustments by VCReg are set back to the Windows standard. With WPI you can unlock the boot loader for every build, but you cannot run root access for every build. Please read the "Getting started" exactly. Visit the official site, Rene has also made a nice video in which he briefly describes how it works (english).

https://www.wpinternals.net/

Klaus1979 schrieb:Unlock Alternative

https://forum.xda-developers.com/windows-10-mobile/windows-10-mobile-apps-and-games/app-interop-tools-versatile-registry-t3445271

Zitat:You can switch on the backup under All Settings / Update and Security / Backup, a backup file is created on OneDrive which can also be used by other devices connected to this account. You can also set which app data should be included in the backup. Under All Settings / Accounts / Sync Settings you will find further options that can be synchronized with the connected account. This service still works for Windows 10.

The paths are taken from the German menu navigation, which is different in the Hungarian menu navigation, but I don't think.

If you want a real backup and don't want to knot your brain, you will end up at WPI again. With WPI you can create backups of the partitions EFIESP, MainOS and Data, all three together result in a full flash backup. You can use the created backup to extract individual data or you can play it back or create a ROM from it. For custom ROM you have to read yourself, I never get to it because I am so lazy.

lloyd schrieb:Hi Klaus, I took a holiday from thinking too hard about phone hacking
Seeing as my mother will be a light user, I won't try to change her paging files. I have a 950 XL with a broken screen somewhere, I might dig it up some time and try WoA as well

lloyd schrieb:I took your advice and didn't try to alter the manifest!

lloyd schrieb:I looked into this, unfortunately my 950 is already too "new" for WP Internals, it only supports up to version 15254.547, when I am on 15254.603...

This method for "x50 devices" uses vcREG to replace NDTK, after reading the last of that thread I'm nervous to touch my 950!

lloyd schrieb:I got excited when I found https://forum.xda-developers.com/win...m-rom-t3404216 and https://protobetatest.com/2018/08/20...eed-to-do-now/

lloyd schrieb:I am not afraid of command line tools, but I don't think there is a method to do this until I have mass storage access.

lloyd schrieb:I have dug out a 640 to use as my test phone, although I just discovered it is SIM-locked...